ATI Technologies AT525NC Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken ATI Technologies AT525NC herunter. ATI Technologies AT525NC 14 Seiten. Class d 2 to 8-channel

ATI Technologies AT525NC Benutzerhandbuch

Handles and Rack Mounting

The AT500
Series amplifiers can be rack mounted
NC
into a standard 19-inch rack with the addition of rack
ears and handles. There are four kits available for the
AT500
amplifiers, two for the small, shallow chassis
NC
amplifiers;
AT522
, AT523
NC
AT542
and two for the large, deep chassis amplifi-
NC
ers;
AT525
, AT526
NC
AT543
and AT544
. The kits are available in black
NC
NC
and silver to match the handles to the front panels. The
kits are available separately for an additional charge
and include instructions and hardware for proper
mounting of the parts to the amplifier.

Front Panel Layout

1.
ATI LOGO.
2.
PEAK POWER LED. Illuminates RED when any amplifi-
er channel reaches full output.
3.
STANDBY LED. When the MAIN POWER switch is
pressed, the STANDBY LED illuminates until the amplifier
has completed the turn-on process and enters the playback
mode. When the playback mode is reached, the STANDBY
LED turns off. After 10 minutes (approximately) with no
input signal, the STANDBY LED illuminates indicating the
amplifier has entered SLEEP MODE. While in SLEEP
MODE, internal processes are scaled back reducing power
consumption. When a signal is again present at any of the
inputs, the STANDBY LED will turn off and playback re-
sumes instantaneously.
AT500NC Manual
,
AT524
NC
NC
, AT527
,
AT528
NC
NC
To order, call your dealer or ATI and order SKU # /
Model "NC RMK". You will need to specify which
model and color of AT500
vide you with the correct length of rack ear and the cor-
rect color of handle and hardware.

Owner's Guide Conventions

and
For clarity purposes, references to buttons and LED's
,
NC
will be shown in bold capital letters.
1
2
3
4
4.
ILLUMINATED POWER SWITCH. When the amplifier
is plugged in and idle, the ILLUMINATED POWER
SWITCH pulses slowly and dimly. When the ILLUMI-
NATED POWER SWITCH is depressed, the illumination
of the switch becomes constant, the STANDBY LED illumi-
nates and the amplifier begins the turn-on process. When the
turn-on process is complete, the ILLUMINATED POWER
SWITCH brightens fully, the STANDBY LED turns off
and the amplifier begins playback.
4
you own so we can pro-
NC
Rev-05/18