ATI Technologies AT6000 SIGNATURE SERIES Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken ATI Technologies AT6000 SIGNATURE SERIES herunter. ATI Technologies AT6000 SIGNATURE SERIES 12 Seiten. Pure balanced 2 to 7-channel power amplifier signature series
Seite drucken
Getting to Know the Rear Panel
A. Balanced XLR Audio Inputs
Use the BALANCED INPUT jacks to connect to the outputs
of a preamplifier or other control device with XLR outputs.
B. Input Selector Switch
Selects either the BALANCED INPUT (XLR) or the UN-
BALANCED (RCA) INPUT jack.
C. Unbalanced Audio Inputs
Use the UNBALANCED INPUT jacks to connect to the out-
puts of a preamplifier, receiver with preout connections, CD
player, or other source device with RCA style outputs.
D. Product Serial Number
Enter into the space provided on Page 10.
E. Ground Terminal
Use to interconnect chassis where necessary.
A B
C
H
Connecting Your Amplifier
When making connections between any source components and the amplifier, or when making connections to any speaker, be certain
that both the input devices and the amplifier are turned off. To assure that there will be no unwanted signal transients that can damage
equipment or speakers, it is always best to unplug all equipment before making any connections.
F. Master Power Switches
Turns the current to each bank of the amplifier on or off.
G. Remote Trigger Input
Use the REMOTE TRIGGER jack to connect to a compatible
preamplifier, source device, or other product with a
3.3-24 VDC output.
H. Speaker Outputs
Use the OUTPUT binding posts to connect the amplifier to your
speakers; red for positive, black for negative.
I. Power Supply Voltage Indicator
The proper line-voltage is marked in green.
J. AC Input
Use the included power cords to connect your amplifier to an
AC power source. For maximum power, two independent
circuits should be used.
D
I
E
F
G
J
Page 4