ATI Technologies AT7012 Benutzerhandbuch - Seite 12
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken ATI Technologies AT7012 herunter. ATI Technologies AT7012 14 Seiten. 12 & 16 channel multizone distribution power amplifiers
Seite drucken
Appendix B - Specifications
Analog Audio Inputs
Input Impedance
Input Sensitivity
Gain
Polarity
Speaker Output
Mode / Process
Power Output - 8 ohms
Per Channel
20 Hz-20 kHz, < 0.02% THD
1 kHz, 0.02% THD, (Watts)
1 kHz, 1% THD
Power Output - 4 ohms
Per Channel
20 Hz-20 kHz, < 0.02% THD
1 kHz, 0.02% THD, (Watts)
1 kHz, 1% THD
Distortion
THD + N, 20Hz-20kHz, 8Ω, 70W
THD + N @ 1 kHz into 8Ω, 70W
Frequency Response
Signal to Noise Ratio
Slew Rate
Crosstalk
Trigger Input
Dimensions (H x W x D)
Both Models (Without Feet)
Both Models (With Feet)
Shipping
Weight - Amplifier
Weight - Shipping
AT7000 Manual
-
(Specifications subject to change without notice)
Zone - One Stereo Pair of Single-ended (RCA) jacks
Bus - One Stereo Pair of Single-ended (RCA) jacks
Toggle Switch to choose between LOCAL and BUS Input jacks
"Phoenix" Style Pluggable Terminal Blocks
Standby: Amplifier is ready to be turned on via front panel switch or remote trigger.
Overcurrent, D.C., and/or thermal protection: Amplifier will cycle.
Persistent Fault or Catastrophic D.C. or output stage failure: Amplifier will shut down.
AT7012
12 Channels
AT7012
12 Channels
AT7012
+0, -0.5 dB, 20 Hz to 20 kHz, load independent
Better than 100 dB referenced to rated output (A-Weighted)
>-55dB (Adjacent Zones), >-70dB (Skipped Zones), >-80dB (Bank/Bank)
7" (4RU) x 17" x 17" (177 mm x 432 mm x 432 mm)
7.45" x 17" x 17" (190 mm x 432 mm x 432 mm)
Add 1 inch (25mm) depth for connectors.
15" x 24" x 25" (381mm x 610mm x 635mm)
66lbs (30kg)
80lbs (36.4kg)
11
20 kΩ Balanced for each phase
0.92V input for 70W RMS
8 ohms
28.25dB
Non-Inverting
70W
70W
75W
TBD
TBD
TBD
<0.1%
<0.02%
>40V per microsecond
3-24 VDC; Steady State
AT7016
16 Channels
AT7016
16 Channels
AT7016
73lbs (33.2kg)
87lbs (39.6kg)
Rev-11/19