carmelec Magnetis Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Messgeräte carmelec Magnetis herunter. carmelec Magnetis 12 Seiten.

Magnetis - User's manual version du 6 mars 2019 - Page 7

MEASUREMENT PROCEDURE

MAGNETIS has an automatic zero process. It can by access by briefly pressing

(<1s) the central key. This setting is to be done by placing horizontally the meter, far

away from any magnetic mass and if possible in the east-west direction to free itself

from the terrestrial magnetic field (which can reach +/- 40 A/m).

To facilitate its use, MAGNETIS has no gain adjustment feature which would

be accessible by the user. This setting is made at the manufacturer factory and does

not fluctuate.

We advise you to check the meter before any use with a reference calibrated

magnet.

The zero of the meter should be adjusted before taking any measurement (See

paragraph « Zero »).

The measurement is then taken by placing the probe face on the surface of the

component and by direct reading of the residual value on the display.

MAGNETIS incorporates features which allow you to obtain reliable measures:

It looks like a bar-graph which is filled as MAGNETIS integrates the values of

the magnetic field. The reading is stable as soon as it disappears.

It allows keeping on the display the maximum detected value. This value is

erased during zero process.