Formula Sound FF-4.2L Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für DJ-Ausrüstung Formula Sound FF-4.2L herunter. Formula Sound FF-4.2L 12 Seiten.
Channels 2 – 4 have 2 switches that allow each channel to be assigned to a side of the
cross fader, XFA assigns the channel to the left and XFB assigns the channel to the
right of the cross fader. If both are pressed then XFA takes priority.
Output Section
Console microphone
th
The output section includes the 5
input, a console microphone, the console
microphone input is on XLR and there is a gain trim and phantom power switch.
The console microphone has a 3 band EQ (not full kill), gain control, MIC ON switch
and CUE. The console microphone is routed directly to the master and is not included
in the booth output.
Headphone monitoring
Any CUE selection on the inputs sends a copy of that input to the headphone section,
if multiple input CUE switches are selected those inputs are summed together.
The CUE/BAL control selects the CUE content or the master signal to be sent to the
headphones (setting the control part way gives a mix of master and CUE signals in
proportion to the position of the control eg mid is 50:50).
The pre/post EQ sets the CUE for all 6 channel inputs to be pre or post EQ, the
console mic CUE is always post EQ.
The split control gives CUE in the left ear and master signal in the right ear of the
headphones when the CUE/BAL control is in the CUE position.
There are 2 headphone outputs, a stereo ¼" jack socket and a 3.5mm jack socket, the
headphone impedance on each should be no less than 32 Ohms.
The headphone volume control is marked PHONES, the level from the headphones is
also dependent on the settings on the rest of the mixer and of course the level of the
input signal.
Hearing damage is caused by loud sound, the louder the sound the shorter the
length of time to cause permanent hearing damage. Always start with the
PHONES control at a quarter turn and increase as required.
The UK acceptable sound level for employees on an 8 hour shift is 86dB(A).
Master output
The master output is on a pair of balanced XLR connectors, there is a 12 LED stereo
meter and volume control labelled MASTER.