Formula Sound ZMR 80 Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für DJ-Ausrüstung Formula Sound ZMR 80 herunter. Formula Sound ZMR 80 10 Seiten. Stereo muldar zoner
Seite druckenOutput Module (See drawing PC409 later in manual)
An output module will carry two stereo (or mono) outputs which may be balanced or
unbalanced, you may have up to 6 output modules to provide up to 12 Zones. There is the
ability to connect a remote panel for each Zone, the remote panel provides input select and
volume control.
On the front panel each output has volume control, input select button and LED's indicating
which input is selected. There is also the option to connect remote panels for input and volume
controls, remote panels are enabled by the input select button and the remote LED illuminates
when remote panel operation is selected.
Once the remote panel is enabled the input select button can be disabled by holding it down for
about 3 seconds, the remote LED will flash once to indicate the control is locked (to prevent
accidental changes). By holding the input select button down for another 3 seconds the control
is unlocked.
On the rear panel the output connections are on a 6 pin (2 x 3) single in line connector (mating
part supplied), the remote panel plugs into a 3 pin connector (mating part supplied). Screwdriver
adjustable two band EQ is also accessible on the rear panel.
Mono operation is selectable on an internal jumper.
A custom version is available from the factory without paging that has 7 or 8 output module (14
or 16 Zones) with less input modules.
Remote Panels
Remote panels may be connected as required to provide control of input selection and volume
in the room (zone) where the audio is fed to, selecting remote on the output module will enable
the remote panel (flashing green LED means no remote panel connected).
Blanking modules
Blanking modules are available for any unused slots.
Chassis
The Chassis is 19" and 4RU height.
Remote Paging Microphone
The remote paging microphone unit connects to the Page PSU module via the RJ45
connection.
The remote microphone allows paging to any selected Zones or all Zones.
The remote paging microphone is only live when a paging button (SEL or ALL) is pressed.
The microphone itself is plugged into an XLR connector on the remote paging microphone unit
and is replaceable.