Anden A100F Installations- und Betriebsanleitung - Seite 11

Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Luftentfeuchter Anden A100F herunter. Anden A100F 16 Seiten.

REMOVING THE DRAIN INSERT

1. Turn the ON/OFF switch OFF�

2. Remove the filter access door from the drain side of the dehumidifier�

3. Remove the filter from the dehumidifier to access the drain insert�

4. Locate the drain insert which is located over the drain opening�

5. Remove the drain insert by hooking your finger into the finger loop

and gently lifting the cover up and out of the drain pan�

6. Clean the drain insert with warm water and mild detergent solution�

FIGURE 7 – DRAIN INSERT

Do not use spray solvents or cleaners on or near the inlet side of the dehumidifier.

If desired, apply cleaner to a cloth and use to clean the cabinet.

REINSTALLING THE DRAIN INSERT

1. Reinstall the drain insert by inserting your forefinger into the finger

loop and grasping the outer edge of the finger loop with your thumb�

2. Gently insert the drain insert tip into the drain opening and tilt the

cover downwards into place�

3. Insure the drain insert is seated properly by checking the top surface

of the drain cover is the same surface height as the filter guide

channel�

4. Turn the ON/OFF switch ON�

5. At the UI control, select the ON/OFF button and switch to ON mode�

DRAIN INSERT

CAUTION

90-2607