commtech wireless 7950 Kurzanleitung

Blättern Sie online oder laden Sie pdf Kurzanleitung für Pager commtech wireless 7950 herunter. commtech wireless 7950 2 Seiten.
Auch für commtech wireless 7950: Benutzerhandbuch (16 seiten), Benutzerhandbuch (2 seiten)

Seite drucken

THE 7950 PAGER

Case Layout

1.1

Hand Programming Menu

1.2

 With the pager turned on, hold down the

 You will be prompted for a four digit numeric password.

 Use the

selected digit. Press the

are entered, press the

0200.

 Once you are in the programming menu, you will see the first four cap codes ready for viewing or

editing. There are eight cap codes available in total. The A, B, C, D, E, F, G, H at the start of the line

corresponds to cap code 1 to 8.



NOTE: If you just need to change frequency or baud rate and not any capcodes, you can press the

Arrow Key to jump to that screen.

 Each cap code can be enabled or disabled if required. This is what the ON or OFF field before each

cap code refer to.

 Use the

Key to move to the next field.

Escape Key to increase the selected digit and the

Arrow Key to move along to the next digit. After the correct digits

Arrow Key to proceed to the first screen. By default this password is

Escape Key and

PASSWORD:0000

A: [ ON]

0000008

B: [ ON]

0000016

C: [ ON]

0000024

D: [ ON]

0000032

Read Key to change the selected field. Use the

Read Key for 3 seconds.

Read Key to decrease the

Arrow