Andersen VeriLock Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch für Sicherheitssensoren Andersen VeriLock herunter. Andersen VeriLock 6 Seiten. Security sensor lock
Auch für Andersen VeriLock: Handbuch (6 seiten), Handbuch (13 seiten), Anmeldung (10 seiten), Anmeldung (6 seiten), Handbuch (6 seiten), Handbuch (5 seiten), Service-Handbuch (6 seiten)
Seite drucken8
Interior
Remove screws from left lock and dispose of properly. Do not remove lock. Position VeriLock dummy cover around left lock and fasten using #8 x 1"
color matched screws provided. Do not over tighten screws.
Remove screws from left lock and dispose of properly. Do not remove lock. Position VeriLock dummy cover around left lock and fasten using #8 x 1"
color matched screws provided. Do not over tighten screws.
9
Interior
Retract tilt latches by pushing lock handle(s) outward. Tilt bottom sash in and support.
Retract tilt latches by pushing lock handle(s) outward. Tilt bottom sash in and support.
10
Interior
Keeper
Keeper
Clean area on keeper to receive magnet with cleaning wipe provided. Remove adhesive liner and position keeper magnet as shown. Press firmly in place.
Clean area on keeper to receive magnet with cleaning wipe provided. Remove adhesive liner and position keeper magnet as shown. Press firmly in place.
9142195
For Units with Two Locks Only /
Keeper Magnet
Keeper Magnet
Adhesive Liner
Adhesive Liner
4
For Units with Two Locks Only
VeriLock Dummy Cover
VeriLock Dummy Cover
>100º
NOTE: Set window on
a support object at
an angle greater than
100 degrees.
NOTE: Set window on
a support object at
an angle greater than
100 degrees.
NOTE: Magnet is
installed on the right
keeper of units with
two locks, as viewed
from the interior.
NOTE: Magnet is
installed on the right
keeper of units with
two locks, as viewed
from the interior.