Carnage Tools CT1KWL Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Arbeitslicht Carnage Tools CT1KWL herunter. Carnage Tools CT1KWL 6 Seiten. Rechargeable led work light

Seite drucken

WARNING

Opening the light will void warranty.

Do not look directly into the light emitting lamp - Risk of eye injuries!

Do not operate in direct sun light or extreme temperature conditions.

Operating temperature, 15 °F to 105 °F.

Keep away from children! Children should be supervised in order to ensure

that they do not play with the device!

Do not place the light face down while on for long periods of time as this will

cause damage to surface and possible fire.

Power Input only can be 5V-1A UL/ETL approved adapter. Do not use

different power input adapter. This may cause damage to the product and

may cause fire.

OPERATING & CHARGING PROCEDURE

CT1KWL Operating mode as below

- Press the Power Button first time, top light switch on.

- Press the Power Button second time, main light switch to Low mode.

- Press the Power Button third time, main light switch to Medium mode.

- Press the Power Button fourth time, main light switch to High mode.

- Press the Power Button fifth time, all power off.

Switch lamp off and connect with USB charger during charging.

The battery indicator will blink during charging.

All the battery indicator lights will stay lit after finished charging.

If the battery indicator did not light up, please remove the charger and try

again.

Always only use the charger recommended by CARNAGE TOOLS

the lamp. The use of a NON-recommended charger can lead to a fire and

destroy the lamp.

Before using the hand lamp for the first time, charge it for 4-5 hours.

Fully charge the hand lamp before it is stored for a long period.

to charge