Andersen A2 Handbuch - Seite 15
Blättern Sie online oder laden Sie pdf Handbuch für Zubehör für Kraftfahrzeuge Andersen A2 herunter. Andersen A2 16 Seiten.
Auch für Andersen A2: Installationshandbuch (6 seiten)
Danger
Danger to life due to electrical voltage! Injuries due to electric shock
and/or burns, possibly resulting in death, are possible.
During all work, make sure at all times that power to the system is
switched off and secured so it cannot inadvertently be switched on.
• Before commissioning the device check that all screw and terminal
connections are tight.
• The termination panel covers must never be left opened without
supervision. Fit the termination panel cover when you leave the
charge point.
• Do not make any unauthorised changes or modifications to the
charge point.
• Repair work to the charge point may only be completed by the
manufacturer or a trained expert.
• Do not remove any identifiers such as safety symbols, warning
instructions, rating plates, labels or cable markings.
• Ensure that the charging cable is not mechanically damaged (kinked,
jammed or run over) and that the contact area does not come into
contact with heat sources, dirt or water.
Warning
Safety notice:
• Switch off on all poles and from all sources.
• Secure to prevent it being switched on again.
• Verify isolation from the supply.
• Earth and short-circuit.
• Cover neighbouring live parts and cordon off danger areas.
Caution
Ensure that the charge point is not damaged by incorrect handling
(housing cover, internal parts, etc.).
On outdoor installations, do not open the termination panel cover in
damp conditions.
Danger of breaking the plastic housing.
• Do not tighten the securing screws with force.
• The installation area must be completely flat, do not bend the
housing.
• Electronic components may be damaged if handled. Before handling
modules, perform an electrical discharge process by touching a
metallic earthed object.
A failure to follow the safety information may result in a danger of death,
injury and damage to the device. The device manufacturer cannot
accept any liability for claims resulting from this.