Andersen Hitches Ultimate 5th Wheel Connection Installationshandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör für Kraftfahrzeuge Andersen Hitches Ultimate 5th Wheel Connection herunter. Andersen Hitches Ultimate 5th Wheel Connection 12 Seiten. Rail mount
Auch für Andersen Hitches Ultimate 5th Wheel Connection: Installationshandbuch (12 seiten)
Seite drucken
3-2
NOT fully tightened
3-3
3-5
NOTE: Because kingpins vary in
height, some blocks will have space
between the coupler block and the
kingpin plate (as shown at right) while
others will be flush. This is normal and
does not affect performance at all.
Page 6 of 12 • Andersen Ultimate 5th Wheel Connection (Rail Mount) Installation Manual 10-2018 • www.AndersenHitches.com
40 ft-lbs of torque
3-2. Place the kingpin coupler block on the trailer
kingpin with the greaseless ball socket face-down.
Longer pin boxes may require installation of the
coupler block with the greaseless opening towards
the back of the pin box. Do not attach the remote
latch cable bracket yet.
3-3. Insert the two 5" long kingpin bolts into their
holes to hold the coupler block on the kingpin and
place the washers and nuts on the bolts as illustrated
at left, DO NOT tighten the nuts until step 3-6.
Make sure the bolts are all the way flush to the block.
3-4. Make sure the coupler block is centered on the
pin box.
3-5. Using a 1/4" allen wrench or allen wrench bit,
tighten the 4 set screws to 40 ft-lbs of torque.
3-6. Use wrenches to tighten the nuts on both kingpin
bolts until they are snug. Do not over tighten the
bolts or it could result in cracking the red funnel.
NOTE:
You can tow without the red funnel
without affecting the performance of the hitch.
3-6
Tighten until snug
(over tightening could crack funnel)