ATIGO A1001 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Intercom System ATIGO A1001 herunter. ATIGO A1001 8 Seiten. 2-wire audio receiver

Secondary Address Settings

When using multiple audio receivers in the

same apartment, the receivers must be set to

the same user code and the Primary /

Secondary type should be adjusted to ON

accordingly on the receivers.

To program we use DIP2 switches as follows

DIP2 switches 1 and 2 are used to set the

Primary / Secondary address or extended

address

DIP2 switch 3 is not used

Use adjacent table to set up to three

additional receivers.

There are three volume ranges to choose from

low volume range

mid volume range

high volume range

Pick up the receptor and then press K3 button to cycle through each of the three volume ranges.

Hang up the receptor to exit volume settings.

There are four groups of ring tones to choose from as shown in the table below