ATIGO A1702 Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Intercom System ATIGO A1702 herunter. ATIGO A1702 12 Seiten. 2 wire digital video system
Auch für ATIGO A1702: Installationshandbuch (15 seiten)
Seite drucken
Screen and volume adjustments
During an active call either from the door entry panel or intercom communication, you can adjust the
contrast, brightness, colour or volume.
Image adjustments
There are three predefined modes to select from: Normal, Bright, and Soft. Each mode can have
its contrast, brightness or colour further tweaked as needed.
Adjust the contrast of the screen within the range zero to nine by pressing the "+" or "-".
1.
Adjust the brightness of the screen within the range zero to nine by pressing the "+" or " -".
2.
Adjust the colour of the screen within the range zero to nine by pressing the "+" or " -".
3.
Volume adjustments
In the same way as the image, the volume can be adjusted if it is too low or too high.
Adjust the volume of the screen within the range zero to nine by pressing the "+" or " -"
1.
Door release
When a visitor pushes the call button from the
entry panel, the receiver will start ringing. To
answer the call, touch Talk/Mon button. Press
the unlock button to release the primary door.
If the call comes from a secondary entrance,
nd
press unlock 2
button. Check with your
installer if the lock is electric and if it can
connect to the system.
Call another room or apartment (Intercom)
It is possible to communicate with another receiver located in another room of the house or with a
monitor in another apartment.
Select Intercom function from the Main Menu.
1.
Select the Keypad button you wish to call a receiver extension that you know and type the
2.
receiver number.
Select the Name list button if you wish to view a list of saved receiver numbers.
3.
4.
You can also select Inner Call to open communication with another room in the same
house.
5.
Selecting the Guard Station will call the concierge unit.