ATIGO A3101 Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationshandbuch für Intercom System ATIGO A3101 herunter. ATIGO A3101 7 Seiten. 2-wire video system
Auch für ATIGO A3101: Installationshandbuch (11 seiten), Installationshandbuch (15 seiten)

Seite drucken
Electric lock mode settings
Set the Camera Module in to Programming
mode:
1.
Press Key A, the Unlock Indicator will
turn on with the warning sound of a long
Beep followed by a short Beep!
2.
Press Key A again to select lock mode:
a. Fail Locked Lock Mode = 0 (default)
Contact status: Normally Open
The Status indicator blinks once with the
warning sound of a single long Beep.
b. Fail Unlocked Lock Mode = 1
Contact status: Normally Closed
The Status indicator blinks twice with the
warning sound of a long Beep followed by
a short Beep.
Lock time delay setting
When the Camera Module is in programming
mode:
1.
Press Key A. The Unlock indicator turns
on with the warning sound of a long Beep
followed by a short Beep.
2.
Press Key B and hold for desired lock
opening time.
The Unlocking Time delay is indicated by the
number of times that the Status indicator
blinks (set in seconds). For example: The
Status indicator blinks four times, that means
the unlocking time is 4 seconds.
5 |
P a g e
Electric lock with additional
power supply.
1.
Contact rating is limited to
MAXIMUM CURRENT of 1000mA.
2.
The jumper JP-LK must be taken off
before connecting.
3.
Set electric lock mode using touch keys A
and B
Fail Locked Lock Mode = 0
(default)
Fail Unlocked Lock Mode = 1
24V DC and