Community Distributed Design DS8SUB Installation und Betrieb Wartung Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Installation und Betrieb Wartung Benutzerhandbuch für Redner Community Distributed Design DS8SUB herunter. Community Distributed Design DS8SUB 12 Seiten. Distributed design series surface mount loudspeakers
Auch für Community Distributed Design DS8SUB: Installations- und Betriebshandbuch (12 seiten)
Seite drucken
Installation and Wiring
1. Connect incoming input wires
(and optional loop-thru wires)
from wall to four Euroblock screw
terminals concealed in the base of
the Infin-A-Ball bracket.*
*Note: Check local codes
Input Wires
to determine if a wall
(not included)
box or metal plate is re-
quired for the integrated
Loop-Thru Wires
wiring. See page 10.
(optional)
Terminal Block
Infin-A-Ball bracket
2. Secure the Infin-A-Ball bracket to the
wall using your screws or other fasteners
according to local building and safety codes.
Loosen
Tighten
3. Insert the hex wrench into the socket near
the rear of the loudspeaker cabinet, and
turn counterclockwise to loosen the clamp
setscrew.
4. Fit the cabinet onto the IAB bracket's ball-
end, then tighten the clamp sufficiently to
hold the loudspeaker in place, but allowing
for positional adjustment.
Community Distributed Design Series
Installation and Operation Manual
Page 7
Surface Mount Loudspeakers