ATIK Cameras 3 Series Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera ATIK Cameras 3 Series herunter. ATIK Cameras 3 Series 10 Seiten.
Auch für ATIK Cameras 3 Series: Benutzerhandbuch (10 seiten), Benutzerhandbuch (10 seiten)
Seite drucken3.3 Optical Window
The optical window used in front of the CCD is a BK7 with BBAR coatings on both sides
ensuring that no reflection will appear in your image.
3.4 Analog to Digital Converter (ADC)
The Analog to Digital Converter (ADC) is a 16-bit ADC. This means that your Atik
camera will allow you to record subtle levels of gray, providing you with enhanced
dynamic range when capturing an image.
3.5 Power Consumption
Your Atik camera was designed to have low power consumption: please see the table
in section 4 for details specific to your camera model. The 2.1mm centre-positive DC
input is compatible with a wide range of 12V DC supplies.
WARNING: If you have purchased the optional mains power adaptor, please
note that it is for indoor or observatory use only. There is a risk of electric
shock if the adaptor is used in damp environments or outside. If in doubt do
not use the adaptor and consult a trained electrician.
3.6 USB Port
The Atik series 3 cameras use a USB 2.0 high-speed interface, allowing full- frame
image downloads in only a few seconds. A higher speed "preview" mode is also
present, providing roughly twice the speed.
3.7 Autoguiding Port
The autoguiding port enables you to do autoguiding with any ST4 compatible guiding
software when using the optional cable.
Guider port pinout:
Page 6