Bosch PHG 600-3 Original-Bedienungsanleitung - Seite 5
Blättern Sie online oder laden Sie pdf Original-Bedienungsanleitung für Trockner Bosch PHG 600-3 herunter. Bosch PHG 600-3 12 Seiten. Hot air gun
Auch für Bosch PHG 600-3: Original-Bedienungsanleitung (12 seiten)
![Bosch PHG 600-3 Original-Bedienungsanleitung](/uploads/products/server2/1420136/1420136.png)
OBJ_BUCH-1348-001.book Page 12 Tuesday, January 25, 2011 1:51 PM
12 | English
Safety Notes
en
Read all safety warnings and all in-
structions. Failure to follow the warn-
ings and instructions may result in elec-
tric shock, fire and/or serious injury.
Supervise children. This will ensure that
children do not play with the hot air gun.
Children or persons that owing to their
physical, sensory or mental limitations or to
their lack of experience or knowledge, are
not capable of securely operating the hot
air gun, may only use this hot air gun under
supervision or after having been instructed
by a responsible person. Otherwise, there is
danger of operating errors and injuries.
Be careful when working with the power
tool. The power tool produces intense heat
which can lead to increased danger of fire
and explosion.
Exercise special care when working close to
inflammable materials. The hot air jet or the
hot nozzle can ignite dust or gases.
Do not operate or work with the power tool
in areas where there is danger of explosion.
Never direct the hot air jet at the same po-
sition for longer periods. Easily inflammable
gases can develop e.g., when working plas-
tic, paint, varnish or similar materials.
Be aware that heat can be conducted to hid-
den covered materials and can ignite them.
After using, place the power tool down in a
secure manner and allow it to cool down
completely before packing it away. The hot
nozzle can cause damage.
Do not leave the switched-on power tool un-
attended.
Store idle power tools out of the reach of
children. Do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
Do not expose the power tool to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
1 609 929 X70 | (25.1.11)
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the pow-
er tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
Always wear safety goggles. Safety goggles
will reduce the risk of injuries.
Disconnect the plug from the socket outlet
before making any adjustments, changing
accessories, or placing the power tool
aside. This safety measure prevents uninten-
tional starting of the power tool.
Check the power tool, cord and plug each
time before use. Do not use the power tool
if damage is determined. Do not open the
power tool yourself and have it serviced on-
ly by a qualified repair person using only
original spare parts. Damaged power tools,
cords and plugs increase the risk of electric
shock.
Provide for good ventilation of
your working place. Gas and va-
pour developing during working
are often harmful to one's health.
Wear safety gloves and do not touch the hot
nozzle. Danger of burning.
Never direct the hot air jet against persons
or animals.
Do not use the power tool as a hairdryer.
The hot air being blown out is significantly
hotter than that from a hairdryer.
When operating the power tool in damp en-
vironments is unavoidable, use a residual
current device (RCD). The use of a residual
current device (RCD) reduces the risk of an
electric shock.
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Bosch Power Tools