Anderson RB600 Kurzanleitung für die Inbetriebnahme - Seite 5
Blättern Sie online oder laden Sie pdf Kurzanleitung für die Inbetriebnahme für Landwirtschaftliche Geräte Anderson RB600 herunter. Anderson RB600 5 Seiten.
Seite druckenQUICK START GUIDE
RB600
The RB500 is equipped with a mechanical cut and hold system. The mechanical cut and
hold works on a rack and pinion system that stretches a large spring as the table turns.
The trigger for the release of the system is under the table and is activated as the table
dumps. If the plastic isn't cut or not completely cut you want to make sure the blade is
sharp and free of rust first. Then you can check if the trigger hits the plate at the right
time and adjust it if need be.
Fine tuning adjustment
Activation plate
Basic adjustment
Activated at the right time
Activated too early