Bosch Series 4 Gebrauchsanweisung - Seite 18

Seite drucken

Wipe with some washing-up liquid and a damp cloth. Always wipe parallel to the natural grain. Otherwise,

Stainless steel

you may scratch the surface. Dry with a soft cloth. Remove flecks of limescale, grease, starch and albumin

fronts

(e.g. egg white) immediately. Do not use any abrasive materials, scouring sponges or rough cleaning

cloths. The stainless steel fronts can be polished using a special care product. Follow the manufacturer's

instructions. You can purchase special stainless steel cleaner from our after-sales service or from specialist

retailers.

Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.

Enamel surfaces and

lacquered surfaces

Do not clean in the dishwasher. Remove the wire rack and clean with a sponge, washing-up liquid and

Burners and steel

some hot water. Remove the burner cup and cap. Clean with a sponge and some hot water and washing-up

grid of the gas burn-

liquid. Ensure that the gas outlets on the burner cups are clean and unobstructed. Brush the igniters with a

ers

small, soft brush. The gas burners only work properly when the igniters are clean. Remove food residue

from the burner shells with some washing-up liquid and a damp cloth. Only use a little water. Water must

not be allowed to enter the appliance. Ensure that the nozzle opening does not become blocked or dam-

aged during cleaning. Dry all parts after cleaning and place the burner cover accurately on the burner cup.

If the parts are not positioned accurately, it will be harder to ignite the burner. The burner covers are coated

with black enamel. Due to the high temperatures, discolouration may occur. This will not impair the function

of the burner. Replace the wire rack in the oven.

Electric hob (option) Clean with the hard side of a scouring sponge and some liquid scouring agent. After cleaning, switch the

hob on briefly to dry it. Wet hobs rust over time. Then apply a care product. Always remove spilt liquids and

food residue immediately.

The metal ring may discolour with time. However, it is possible restore the original colour. Clean the ring

Metal ring of the

with the hard side of a scouring sponge and some liquid scouring agent. When doing so, make sure that

electric hob (option)

you do not scour the adjacent surfaces, as this could damage them.

Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.

Knobs

Can be cleaned with glass cleaner. Do not use any abrasive cleaning agents or sharp metal objects. These

Door glass

could scratch and damage the surface of the glass panel.

Wipe with a damp cloth. Dry with a soft cloth.

Seal

Clean with hot water or vinegar solution. For heavy soiling: Only use oven cleaner on cold surfaces.

Oven interior

Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.

Glass cover on the

oven light

Soak in hot soapy water. Clean with a brush or a sponge.

Accessories

Do not clean in the dishwasher. Never use oven cleaner. To avoid scratches, never touch the metal sur-

Aluminium baking

faces with a knife or similar sharp object. Wipe the surfaces horizontally and without applying pressure with

tray (option)

soapy water and a soft window cloth or a lint-free microfibre cloth. Dry with a soft cloth. Do not use any

abrasive materials, scouring sponges or rough cleaning cloths. They could scratch the baking tray

If a childproof lock has been fitted on the oven door, it must be removed before cleaning. Soak all plastic

Childproof lock

parts in hot soapy water and wash with a sponge. Dry with a soft cloth. If very dirty, the childproof lock will

(option)

not work properly.

Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.

Plinth drawer

(option)

Soak in hot soapy water. Clean with a brush or sponge.

Accessories

Detaching and refitting the rails

The rails can be removed for cleaning. The oven must have

cooled down.

Detaching the rails

Lift up the front of the rail

and unhook it (figure A).

Then pull the whole rail forward

and remove it (Fig. B).

Clean the rails with cleaning agent and a sponge. For stubborn

deposits of dirt, use a brush.

Refitting the rails

First insert the rail into the rear socket, press it to the back

slightly (figure A),

and then hook it into the front socket (figure B).

The rails fit both the left and right sides. Ensure that, as shown

in figure B, levels 1 and 2 are below and levels 3, 4 and 5 are

above.