Bosch WPG23100CL Benutzerhandbuch und Installationsanleitung - Seite 37
Blättern Sie online oder laden Sie pdf Benutzerhandbuch und Installationsanleitung für Trockner Bosch WPG23100CL herunter. Bosch WPG23100CL 48 Seiten.
Seite drucken
Troubleshooting
16 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
"Hot" and the drum
rotates.
Humming noise.
The display goes out
and
Inicio/ Pausa
flashes.
The appliance is not
working.
Appliance paused, but
the drum is rotating.
Creasing.
Cause and troubleshooting
Cooling process active.
Not a fault.
1.
Do not change the programme during the cooling
2.
process.
Note: The cooling process takes up to 10 minutes.
You can continue to operate the appliance.
Compressor active.
Not a fault – normal operating noise.
▶
Energy-saving mode is active
Press any button.
▶
a The display lights up again.
Fluff filter is soiled.
→ "Cleaning the fluff filter", Page 28
▶
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your room or other
▶
appliances are working.
Cooling process active.
Not a fault – no action required.
▶
The load is too large.
Observe the maximum load capacity of the
▶
→ "Programmes", Page 23.
Troubleshooting en
37