Bosch WTA74100ZA Installations- und Betriebsanleitung - Seite 6
Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Trockner Bosch WTA74100ZA herunter. Bosch WTA74100ZA 8 Seiten.
Auch für Bosch WTA74100ZA: Merkmale und Spezifikationen (20 seiten)
![Bosch WTA74100ZA Installations- und Betriebsanleitung](/uploads/products/server2/1421994/1421994.jpg)
Installation
– Scope of delivery: dryer, instruction manual and installation instructions.
– Check dryer for transport damage.
– The dryer is very heavy. Do not lift without assistance.
– Be careful to avoid sharp edges.
– Do not lift the dryer by protruding parts (e.g. the door) - risk of breakage.
– Do not install in a room where there is a risk of freezing.
Freezing water can cause damage.
– If in doubt, have the appliance connected by a specialist.
Setting up the dryer
1.
– The mains plug must always be accessible.
– Ensure that the appliance is installed on a clean,
level and firm surface.
– Install the exhaust air duct -> Installation
instructions for exhaust air duct.
– Keep the area around the dryer clean.
– Level the dryer using the front threaded feet.
– Do not unscrew the threaded feet more than
20 mm.
On no account remove the threaded feet.
Do not install the dryer behind a door or
sliding door which could prevent or
obstruct the dryer door from opening.
This will prevent children from locking
themselves in and risking their lives.
Mains connection
For safety instructions, -> page 11.
2.
– Connect to an AC earthed socket. If in doubt have the socket checked by a specialist.
– The mains voltage and the voltage shown on the rating plate (-> page 9) must be the same.
– The connected load and necessary fuse protection are specified on the rating plate.
7
Remove all accessories
from the drum. The drum
must be empty.
Clean and level
8