Community Playthings KinderVan for Four Produkthandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Produkthandbuch für Stroller Community Playthings KinderVan for Four herunter. Community Playthings KinderVan for Four 3 Seiten.

Seite drucken
Page 3
Maintenance
Information
G644 KinderVan for Four
G646 KinderVan for Six
Customer Service:
United States
PO Box 2
Ulster Park, NY 12487
Office hours: 9-5 EST
Phone (800) 777-4244
Fax (800) 336-5948
(845) 572-3468
www.CommunityPlaythings.com
© 2011 by Community Products, LLC
GL37 DC 6527 Revision J
of the Canopy with the keyhole slot in the top edge
of the seat back and push down until they snap into
place.
To open Canopy, hold back edge and pull front edge
forward. For more shade, the Canopy can be tilted
forward.
To remove Canopy, strike upwards with the palm of
your hand under pivot (see arrow "A" in Figure 5).
If your KinderVan did not come with Canopies
they may be added at any time. Request product
number G641.
Cover
A fabric Cover can be fitted over the entire Kinder-
Van to protect it while in storage. Request product
number G642 (Cover for KinderVan/4) or G643
(Cover for KinderVan/6).
It is unsafe to use accessories not approved by
Community Playthings.
Maintenance
Keep indoors or under Cover when not in use.
(See Cover in "Accessories" section.)
Periodically inspect for cracks, breaks, loose parts,
missing parts, and/or malfunctions. Remove the
product from service when any condition develops
that might make operation unsafe.
Clean KinderVan with mild soap and water.
To clean upholstery, remove dirt and spills quickly
with a clean, dry cloth. Wipe off with clean water
or mild bleach solution. Rinse well with clean water.
The use of solvent-based cleaners can damage the
fabric.
Wash Canopy by hand with lukewarm water and a
mild detergent, and allow to air dry.
Construction
The aluminum chassis and handle have a baked on
finish.
Fiberglass reinforced nylon wheels with ball bear-
ings and steel axles. Tires are solid urethane foam,
requiring no inflation.
Seats are injection molded plastic covered with
waterproof urethane coated fabric laminated to
foam backing.
User Modifications
We are not responsible for modifications made by
customers to our products in the field without our
supervision, testing, or evaluation.
Ordering Parts
To order replacement parts, contact Customer Ser-
vice with a description of the part(s) needed and the
ID Code from the product.
Use only replacement parts supplied by
Community Playthings.