Carolina Cooker M56913 Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Brenner Carolina Cooker M56913 herunter. Carolina Cooker M56913 16 Seiten. Cast iron stove (single burner)
Auch für Carolina Cooker M56913: Benutzerhandbuch (17 seiten)

Seite drucken

Open the LP cylinder valve.

Use a long match or spark igniter and

slowly open the shut-off valve until the

burner lights.

4. Adjust the burner flame using the shut-off valve.

If the burner does not light within

WARNING

five seconds, first close the shut-

off valve and then close the LP cylinder valve OFF.

Wait five minutes for fumes to diminish before

relighting.

5. After the burner is lit, open the shut-off valve

until the flame is at least 5 inches high.

6. Use the air flow control bolt on the burner to

adjust the flame until it turns blue. Adjust the air

flow bolt by hand to either increase or decrease

the amount of airflow.

Note: A flame height of less than five inches will not

produce the blue color when properly adjusted.

Carolina Cooker

844-478-4334

7. If the burner flame does not burn blue, check

the burner venturi for obstructions. Dirt daubers,

spiders, and other insects will build nests blocking

air and gas flow.

After each use, close the shut-off valve

first; then close the LP cylinder valve.

OFF

Always allow the appliance to cool

completely before touching or moving it.

Note: Due to the intense heat from the burner, it

is normal for discoloration to occur on the appliance

during the first few uses.

9. Disconnect the LP cylinder from the appliance

when it is not in use.

10.

The shutoff valve and the LP cylinder

valve should both be in the OFF or

OFF

closed position.

11. Close all gas valves and disconnect the LP cylinder.

12. Replace the protective LP cylinder cap when the

tank is not connected.

Model M56913

January 2018