ComNav P300 Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Monitor ComNav P300 herunter. ComNav P300 17 Seiten.

SinoGNSS P300 Display User Guide

4 Configure the P300 display

This section shows how to configure the P300 display output NMEA data to external

ECU controller by ComNav Technology CRU software.

Visit ComNav Technology website to access CRU software:

http://comnavtech.com/download.asp?bigclassid=28



Install the CRU software to the display.



Run the CRU software.



Click "Set Port", select COM port (COM9) and Baud Rate (usually is 115200),

then click "OK".



Click "Command", send the command "log version" to check if the receiver has

connected with PC successfully.



Sending the following commands to output NMEA data via LAN port from Port

log com1 gpgga ontime 1

log com1 gprmc ontime 1

log com1 gptra ontime 1

log com1 gpvtg ontime 1

saveconfig