Caroma G Series Handbuch für Installation und Wartung - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch für Installation und Wartung für Sanitärprodukt Caroma G Series herunter. Caroma G Series 17 Seiten. Electronic soap dispenser
Auch für Caroma G Series: Handbuch für Installation und Wartung (16 seiten), Handbuch für Installation und Wartung (16 seiten), Handbuch für Installation und Wartung (16 seiten)

PRE-INSTALLATION INFO

CHECK CONTENTS

Separate all parts from the packaging and check each part with the pack contents section. Pay attention to the

variations of the different models.

Make sure all parts are accounted for before discarding any packaging material.

If any parts are missing, do not attempt to install your electronic outlet until you obtain the missing parts.

WARNING

1) To avoid reflection problems keep a distance of more than 300 mm. between

the washbasin and the spout.

2) This outlet model, with an infrared sensor pointing down, is not intended

to be used together with a washbasin of a reflective material such as

stainless steel.

3) If a washbasin strainer is straight below the outlet sensor, use a strainer with

a non reflective finish (do not use a chrome plated one).

PREPARATION FOR INSTALLATION

Flush the water supply lines thoroughly before installing the outlet. Do not allow dirt, teflon tape or metal particles

to enter the outlet. Shut off water supply.

IMPORTANT: All plumbing is to be installed in accordance with applicable codes and regulations.

Installations in Australia and New Zealand must comply with the requirements of AS/NZS 3500.

Min 300 mm.

Bottom of the washbasin