Caroma Invisi Series II Handbuch - Seite 15
Blättern Sie online oder laden Sie pdf Handbuch für Sanitärprodukt Caroma Invisi Series II herunter. Caroma Invisi Series II 16 Seiten. Urinal concealed cistern
Auch für Caroma Invisi Series II: Installationshandbuch (20 seiten)
Seite drucken
Servicing Requirements
Troubleshooting Guide
Spare Parts Information
Maintenance & Spare Parts Instructions
1
Ensure water is turned off and remove Inlet
Valve from tank as per the instructions on
page 13.
3
687 040D
Seal
Remove seal from Cap Assembly.
15
• Inlet Valve Seal may require periodic cleaning (dependant on water quality).
Procedure as defined below.
• Inlet Valve is slow to fill OR fails to open ► Ensure tap is open.
• Inlet Valve fails to close ► Clean & inspect seal as described above, replace Cap Assembly
• If any other issues arise ► Consult a plumber or Caroma After Sales Service.
• Caroma Invisi II Inlet Valve compatible Spare Part Kits are:
687 171 Containing - 1 x Complete Unifill Inlet Valve
- with bayonet connection
687 049 Containing - 1 x Cap Assembly
- 1 x Seal with Lever
687 040D Containing - Seal only
Refer to Maintenance & Spare Parts Instructions
2a
Bracket
To replace complete Inlet Valve:
Rotate nut clockwise & pull to disconnect
it from the Bracket.
4
Wash seal to remove any dirt and inspect
for damage.
& Seal if damaged.
Inlet
A
Valve
INVISI
Servicing - Inlet Valve
687 049
Cap Assembly
687 040D
Seal
2b
B
A
To clean and inspect seal:
Unclip the Adjustment Screw, rotate
clockwise & pull to remove cap assembly.
C
5
Helplines
A
Replace seal onto cap assembly.
If necessary replace cap & Seal (Spare Part
Kit 687 049).
Push & rotate counter-clockwise to re-
attach cap assembly, re-clip Adjustment
Screw and re-fit into tank.
™
SERIES II
C
Cap
Assembly
Adjustment
Screw
B
D