Comnet CNGE24FX12TX12MSPOE Schnellstart-Handbuch - Seite 7
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Router Comnet CNGE24FX12TX12MSPOE herunter. Comnet CNGE24FX12TX12MSPOE 8 Seiten. Industrial grade managed ethernet switch w/ 12 x 100/1000base-fx + 12 x 10/100/1000base-tx ports w/ optional 30w poe
Seite drucken
QUICK START GUIDE
WEB Management
Attention: While installing and upgrading firmware, please remove physical loop connection first.
DO NOT power off equipment while the firmware is upgrading!
Configuration by Web Browser
About Web-based Management
An embedded HTML web site resides in the flash memory on the CPU board. It contains
advanced management features and allows you to manage the switch from anywhere on the
network through a standard web browser such as Microsoft Internet Explorer.
Preparing for Web Management
The default value is as below:
IP Address: 192.168.10.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.10.254
User Name: admin
Password: admin
System Login
1. Launch web browser.
2. Type http://192.168.10.1. Press Enter.
3. The login screen appears.
4. Key in the username and password. The default username and password is admin.
5. Select Enter or OK button, then the main interface of the Web-based management appears.
Warning – Any changes made to the settings will apply only to the current running
configuration of the switch and will be lost in the event of a power cycle.
To save any changes made to persistent memory please go to "Maintenance ¦
Configuration ¦ Save startup-config" to write the changes to the switches startup
configuration.
TECH SUPPORT: 1.888.678.9427
CNGE24FX12TX12MS[POE]
QSG_CNGE24FX12TX12MS[POE] Rev. 2.22.18 PAGE 7