Comnet FVT110M1/BO Installations- und Betriebshandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Extender Comnet FVT110M1/BO herunter. Comnet FVT110M1/BO 4 Seiten. In-dome 10-bit digital video transmitter with bosch biphase and bilinx camera control
Seite drucken
INSTALLATION AND OPERATION MANUAL
FIGURE 3 – BIPHASE DATA SWITCH POSITIONS (FVR110)
The mode for each data channel is configured using a pair of switches on the front panel of the receiver unit. The 2 position CC Contact Switch is not used
when connected to an FVT110/BO in-dome module.
Switch
FIGURE 4 – DATA CONNECTIONS
Customer
Equipment
Up-the-Coax
UTC Control
Control Receiver
Customer
Equipment
Data In (+)
Bi-phase
Data In (–)
INSTALLATION cONSIDERATIONS
This fiber-optic link is supplied as an in-dome module. Units should be installed in dry locations protected from extremes of temperature and humidity.
cAUTION: Take care not to press on any of the LEDs.
IMPORTANT SAFEGUARDS:
A) Elevated Operating Ambient - Consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature
(Tma) specified by the manufacturer.
B) Reduced Air Flow - Installation of the equipment should be such that the amount of air flow required for safe operation
of the equipment is not compromised.
© 2012 Communications Networks Corporation. All Rights Reserved. "ComNet" and the "ComNet logo" are registered trademarks of Communication Networks, llC.
1
2
FVT110/BO
VIDEO IN
FVT110/BO
DOUT(+)
DOUT(–)
3 cORPORATE DRIVE | DANBURy, cT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TEch SUPPORT: 1.888.678.9427 | [email protected]
8 TURNBERRy PARK ROAD | GILDERSOME | MORLEy | LEEDS, UK LS27 7LE
T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | [email protected]
GND
DIN (–)
DIN (+)
DOUT (–)
DOUT (+)
FVR110
VIDEO OUT
FVR110
DIN(+)
DIN(–)
FVT110(M,S)1/BO
Customer
Equipment
Up-the-Coax
Control Transmitter
Customer
Equipment
Data Out (+)
Data Out (–)
INS_FVT110/BO_REV–
2/15/12
PAGE 4