Comnet MLS II Installationshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationshandbuch für Sende- und Empfangsgerät Comnet MLS II herunter. Comnet MLS II 16 Seiten. Mobile radio

Seite drucken

DESK TOP STAND (OPTIONAL) (OBSOLETE)

(MLMA1K) 19A138051G8

Place radio in desktop stand and align mounting holes. Insert the lockwashers

and four M4x8mm hex head bolts through the mounting bracket and secure

radio. Before tightening bolts, position radio to the desired upward angle for the

operator's convenience. After mounting the radio, press radio down onto

mounting surface to engage suction cups. The desktop stand is normally used in

station applications and is used with the standard mobile mounting bracket.

Complete the installation by connecting the microphones, antenna, power cable,

and ground cable.

Figure 8 - Mounting Mobile Bracket to Desktop Stand

AC POWER SUPPLY (OPTIONAL)

(MLPS5K) 19A704647P2 120/240 VAC

After positioning the radio and power supply, install the ground wire. This

grounding will help protect operators and equipment from injury or damage

during lightning storms. An eight-foot power cable is provided to allow for

remote power supply location. Connect the power supply jack to the radio and

AC line cord to AC source.