ATL Berkshire 200 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Telefon ATL Berkshire 200 herunter. ATL Berkshire 200 4 Seiten. Berkshire 200 telephone

Seite drucken

and replace the handset.

•

FROM HEADSET TO HANDSET

If you wish to transfer a call from your headset

to the handset, simply pick up the handset. This

action will switch off the headset.

Features and Facilities

TRANSFER KEY (RECALL)

Berkshire 200 telephones are provided with a

'TRANSFER' key, required by modern public and

private exchanges, in order to gain access to

various features such as 'transferring a call'. For

this, the 2 position selector switch at the rear of the

telephone, must be set to the 'T' (Time Break Recall)

or 'E' (Earth Leg Recall) position, to suit your system

requirements.

REDIAL KEY

If you wish to redial the last number you dialled, you

can do so by lifting the handset and pressing the

'REDIAL' button.

MUTE KEY

The microphone in the handset / headset can

be turned off (mute) in order for you to refer to a

colleague without your caller hearing you.

•

Pressing the 'MUTE' button turns off the

microphone and gives visual LED indication within

the 'MUTE' button.

•

Pressing the 'MUTE' button again turns the

microphone back on and the LED is turned off.

SWITCHABLE MESSAGE WAITING

There are three versions of Message Waiting

Indication supported within the Berkshire 200

telephone (MW3, 8 and 10). This selection is made

via a 4 position switch located to the rear of the

phone, indicated by the letters 'MW'.

A 'RING INDICATOR' setting is provided that has

additional beneﬁ t of being activated by short ring

burst MW signals - see website for details.

In all cases, an LED in the top right hand corner

of the telephone is used to indicate the selected

functions and incoming calls.

Any questions you may have should be directed

in the ﬁ rst instance to your telephone supplier with

details of your PABX.

Further concerns may also be addressed by

calling our Technical Support Department

on 0845 421 0730 or visiting our website,

www.atltelecom.com/support.

MODEM PORTS

Your Berkshire 200 comes with two modem ports

(BS6312 and RJ11) typically used for a PC modem,

or as points of connection for additional telephones.

HEARING AID COMPATIBILITY

For hearing aid users, an inductive coupler has

been installed in the handset of the Berkshire 200,

to improve audible efﬁ ciency.

Installation Notes

MESSAGE WAITING

MW3 is used by systems that use high voltage

DC signalling. MW8/10 however use line reversal

methods to indicate that a message is present.

Please check with your TelecomTeam/Provider for

correct settings as it will depend on what switchboard

you are connected to.

Help

If the telephone appears to be faulty when ﬁ rst

connected, a few simple checks may help to identify

some possible problems, as listed below:

NO DIAL TONE

•

The handset is plugged into the handset socket

not headset socket.

•

Check that the telephone plug is fully inserted in

the socket.

•

If it is, try connecting the telephone into another

socket, if available. If dial tone is now heard, the

original socket is faulty.

•

Alternatively, try connecting another telephone

into your socket. If this telephone gives dial tone,

then your new telephone is probably faulty.

ALL OPERATIONS SEEM SATISFACTORY

EXCEPT THE TRANSFER BUTTON

•

Change the recall selector switch setting (T/E).

If the transfer operation is now satisfactory, the

problem is resolved.

For help with voicemail, call divert and call pickup

please contact your Telecom Team/Provider as this

will vary depending upon what switchboard you are

connected to.