ATL Berkshire 220 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Telefon ATL Berkshire 220 herunter. ATL Berkshire 220 12 Seiten.

MESSAGE WAITING & RINGING INDICATOR
There are three versions of message waiting (MW) indication supported
within the Berkshire 220 telephone (MW 3, 8 and 10). The telephone will
automatically detect what type of MW you require so no user input is required.
In all cases, an LED is built into the headset key of the telephone which is
used to indicate the selected functions and incoming calls.
Any questions you may have should be directed in the first instance to your
telephone supplier with details of your PABX.
SWITCHING MODES OF USE
The headset and handset mode are switchable, when in headset mode,
pick up the handset and the telephone will switch to handset mode. When
in handset mode, press the headset button, hang up the handset, and the
telephone will switch to headset automatically.
HELP
If the telephone appears to be faulty when first connected, a few simple
checks may help to identify some possible problems, as listed below:
NO DIAL TONE
• Check that the telephone plug is fully inserted in the socket.
• If it is, try connecting the telephone into another socket, if available. If dial
tone is now heard, the original socket is faulty.
• Alternatively, try connecting another telephone into your socket. If this
telephone gives dial tone, then your new telephone is probably faulty.
RINGER DOES NOT SOUND
• Check that the telephone plug is fully inserted in the socket.
• If it is, check that the ringer volume is not set to Off.
For help with call divert and call pickup etc. please contact your Telecoms
Team (IT) or Service Provider as this will vary depending on what
switchboard you're connected to and is NOT a function of the Berkshire 220.
Further concerns may also be addressed by calling our Technical Support
Department on 0330 333 8259, our main switchboard on 0330 333 8250 or
visiting our website, www.atltelecom.com/support
– 10 –