COMNET ERICSSON PANTHER 300M Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationshandbuch für Radio COMNET ERICSSON PANTHER 300M herunter. COMNET ERICSSON PANTHER 300M 12 Seiten.

Seite drucken

SAFETY INFORMATION

The operator of any mobile radio should be aware of certain hazards
common to the operation of vehicular radio transmissions. A list of
several possible hazards is given:
1.
Explosive Atmospheres - Just as it is dangerous to fuel a vehicle with
the motor running, similar hazards exist when operating a mobile radio,
be sure to turn the radio off while fueling the vehicle. Do not carry
containers of fuel in the trunk of the vehicle if the radio is mounted in
the trunk.
2.
Interference to Vehicular Electronics Systems - Electronic fuel
injection systems, electronic anti-skid braking systems, electronic
cruise control systems, etc., are typical electronic systems that may
malfunction due to the lack of protection from radio frequency energy
present when transmitting. If the vehicle contains such equipment,
consult the dealer and enlist their aid in determining the expected
performance of electronic circuits when the radio is transmitting.
3.
Dynamite Blasting Caps - Dynamite blasting caps may be caused to
explode by operating a radio within 500 feet of the blasting caps.
Always obey the "Turn Off Two-Way Radios" signs posted where
dynamite is being used.
When transporting blasting caps in your vehicle:
a.
Carry the blasting caps in a closed metal box with a soft lining.
b.
Leave the radio OFF whenever the blasting caps are being put into
or removed from the vehicle.
4.
Liquefied Petroleum (LP) Gas Powered Vehicles - Mobile radio
installations in vehicles powered by liquefied petroleum gas with the
LP gas container in the trunk or other sealed-off space within the
interior of the vehicle must conform to the National Fire Protection
Association standard (NFPA) 58 requiring:
a.
The space containing the radio equipment shall be isolated by a
seal from the space containing the LP gas container and its fittings.
b.
Outside filling connections shall be used for the LP gas container.
c.
The LP gas container shall be vented to the outside of the vehicle.
4