Electrolux EGT6242 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kochfeld Electrolux EGT6242 herunter. Electrolux EGT6242 20 Seiten. 60cm wide gas hob with 4 burners and individual pan supports.
Auch für Electrolux EGT6242: Benutzerhandbuch (16 seiten)

Seite drucken

www.electrolux.com

• Wash stainless steel parts with water,

and then dry them with a soft cloth.

6.2 Pan supports

The pan supports are not

resistant to washing in a

dishwasher. They must be

washed by hand.

1. Remove the pan supports to easily

clean the hob.

Be very careful when

you replace the pan

supports to prevent the

hob top from damage.

2. The enamel coating occasionally can

have rough edges, so be careful

when you wash the pan supports by

hand and dry them. If necessary,

remove stubborn stains with a paste

cleaner.

3. After you clean the pan supports,

make sure that they are in correct

positions.

4. For the burner to operate correctly,

make sure that the arms of the pan

supports are aligned with the centre

of the burner.

6.3 Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, and food with sugar. If not,

the dirt can cause damage to the hob.

7. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

7.1 What to do if...

Problem

There is no spark when

you try to activate the

spark generator.

• Remove when the hob is

sufficiently cool: limescale rings,

water rings, fat stains, shiny metallic

discoloration. Clean the hob with a

moist cloth and some detergent. After

cleaning, rub the hob dry with a soft

cloth.

• To clean the enamelled parts, cap

and crown, wash them with warm

soapy water and dry them carefully

before you put them back.

6.4 Cleaning the spark plug

This feature is obtained through a

ceramic ignition candle with a metal

electrode. Keep these components well

clean to prevent difficult lighting and

check that the burner crown holes are

not obstructed.

6.5 Periodic maintenance

Speak to your local Authorised Service

Centre periodically to check the

conditions of the gas supply pipe and the

pressure adjuster, if fitted.

Possible cause

The hob is not connected

to an electrical supply or it

is connected incorrectly.

Remedy

Check if the hob is correct‐

ly connected to the electri‐

cal supply.