Andon KD-5905 Betriebshandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Blutdruckmessgerät Andon KD-5905 herunter. Andon KD-5905 16 Seiten. Fully automatic arm cuff blood pressure monitor

Seite drucken

DN:KD-5905-SMSY01 V1.0

SETUP AND OPERATING PROCEDURES

1. BATTERY LOADING

a. Open battery cover at the back of the monitor.

b. Load four "AA" size batteries. Please pay attention to polarity.

c. Close the battery cover.

When LCD shows battery symbol

Rechargeable batteries are not suitable for this monitor.

Remove the batteries if the monitor will not be used for a month or more to avoid relevant

damage of battery leakage.

Lithium batteries replacement by inadequately trained personnel could result in a

hazard (such as excessive temperatures, fire or explosion).

Avoid the battery fluid to get in your eyes. If it should get in your eyes, immediately

rinse with plenty of clean water and contact a physician.

The monitor, the batteries and the cuff, must be disposed of according to local

regulations at the end of their usage.

2. CLOCK AND DATE ADJUSTMENT

Radio Controlled Clock (RCC) Receiving

a. Initial receiving:

Once you install the battery, the machine will enter the RCC Receiving Mode.

The RCC symbol will blink during the receiving process.

RCC receiving, the monitor enters the Clock Mode and the LCD displays the

time and date by turns.

and date will be adjusted automatically. If no clock data is received, the monitor

enters Clock Mode and the time and date keeps unchanged.

When the monitor is in the RCC Mode, you can skip RCC receiving and enter

the Clock Mode by pressing "START" button.

Picture 2

b. Manual RCC Receiving

When the monitor is in Clock Mode, keep on pressing button "START" and

"MEM" at the same time, the RCC symbol will blink. If clock data is received, the

time and date will be adjusted automatically and then the monitor enters the

Clock Mode. If no clock data is received, the monitor enters Clock Mode and the

, replace all batteries with new ones.

See picture 2-1 & 2-2.

Picture 2-1

6 / 16

See picture 2.

If clock data is received, the time

Picture 2-2

Operation Guide

After the

Picture 2-3

Template version:1