Andon KD-5917 Betriebshandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Blutdruckmessgerät Andon KD-5917 herunter. Andon KD-5917 15 Seiten.

Seite drucken

DN:KD-5917-SMSY01 V3.0

Radiated RF

3 V/m 80 MHz to 2.5

IEC 61000-4-3

GHz

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is

affected by absorption and reflection from structures, objects and people.

a Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless)

telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV

broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic

environment due to fixed RF transmitters, an electromagnetic site survey should be

considered. If the measured field strength in the location in which the KD-5917 is used

exceeds the applicable RF compliance level above, the KD-5917 should be observed to

verify normal operation. If abnormal performance is observed, additional measures may be

necessary, such as re-orienting or relocating the KD-5917.

b Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.

For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING

Recommended separation distances between

Recommended separation

distance：

3 V/m

GHz

Where P is the maximum output

power rating of the transmitter

in watts (W) according to the

transmitter manufacturer and d

is the recommended separation

distance in meters (m).

Field strengths from fixed RF

transmitters, as determined by

an electromagnetic site survey,

should be less than the

compliance level in each

frequency range.

Interference may occur in the

vicinity of equipment

marked with the following

symbol:

Table 4

14/15

Operation Guide



2 .

80 MHz to 800

MHz



3 .

800 MHz to 2,5

Template version:1