dreo DR-HSH002 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Heizgerät dreo DR-HSH002 herunter. dreo DR-HSH002 13 Seiten. Ptc fan heater

Control Panel

Note: For added convenience, the same control buttons

can be found on the remote control.

Temperature-

Mode / Heat level

Oscillation

Power ON/OFF

Temperature+

Mute / Unmute

Timer

Place the heater on a firm, level surface free from

obstructions, and at least 3ft. (0.9m) away from any wall or

combustible material. Plug into an appropriate voltage AC

120V outlet, the unit will enter standby mode with a beep and

power indicator on red. Your heater is ready for use now.

Power ON/OFF

The RED indicator (Power ON indicator) lightens when

the Heater is switched on.

Press

on the heater / remote control once to turn

the heater ON with default settings: Power indicator

on red, default temperature "95°F" & high heat level

"HI" on LED display.

Press

once again to turn the heater OFF with

15-second delay and countdown time on the display.

Mode / Heat Level Setting

When the unit is on, repeatedly press

heater / remote control to cycle through High (HI)

->Low (LO) -> ECO -> High (HI) modes.

ECO Mode

When ECO mode is turned on, the heater will adjust

the working mode (High or Low) automatically based

on the ambient temperature.

Both "ECO" and "HI" / "LO" will light up on the LED

display.

You can also adjust the temperature by pressing

Mute / Unmute

Hold the MODEL button for 3 seconds or press

the mute button on the remote control to turn the

buzzer on or off. The HI LO and ECO will flash once

along with a beep sound.

on the