Electrolux LIT60433 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kochfeld Electrolux LIT60433 herunter. Electrolux LIT60433 20 Seiten.

Seite drucken

3.2 Built-in hobs

Only use the built-in hobs after you assemble

the hob into correct built-in units and work

surfaces that align to the standards.

3.3 Connection cable

• The hob is supplied with the connection

cable.

• Replace the damaged mains cable only

with the spare parts cable. Speak to your

local Authorised Service Centre.

WARNING!

All electrical connections must

be made by a qualified

electrician.

One-phase connection - 230 V~

3.4 Assembly

If you install the hob under a hood, please

see the installation instructions of the hood

for the minimum distance between the

appliances.

230V~

Green - yellow

Blue and blue

Black and brown

CAUTION!

Do not drill or solder the wire

ends. It is forbidden.

CAUTION!

Do not connect the cable without

cable end sleeve.

Two-phase connection

1. Remove the cable end sleeve from black

and brown wires.

2. Remove an insulation of the brown and

black cable ends.

3. Apply a new wire end sleeve of 1.5 mm²

on each cable end. (special tool

required).

Cable cross section

400V 2~N

Two-phase connection - 400 V 2 ~ N

Green - yellow

Blue and blue

Black

Brown

min.

500mm

If the appliance is installed above a drawer,

the hob ventilation can warm up the items

min.

50mm

ENGLISH