Electrolux 922729 Installationshandbuch - Seite 23

Blättern Sie online oder laden Sie pdf Installationshandbuch für Lüftungshaube Electrolux 922729 herunter. Electrolux 922729 28 Seiten. Built-in hood for electric and gas oven

Seite drucken

1. Installation and Assembly

COMMISSIONING AND SETTINGS

Introduction

G.1

CAUTION

Make sure the appliance is

connected to a water

drainage system, a power

socket, and to the oven

via the oven/hood

Interface cable.

Switch the oven on as indicated in the Installation

Manual (chap. G "COMMISSIONING AND

SETTINGS").

CAUTION

During operation, pay

attention to the hot areas

of the outer surface. Do

not place objects on the

outlets located at the

upper rear of the

appliance.

G.2 Oven settings

When the hood is switched on for the first time,

execute

following procedure on Oven:

AL01 IM_HO_L1_L2_L3_L4

with TOUCH Oven (see annex document) or

AL02 IM_HO_L1_L2_L3_L4

with DIGIT Oven (see annex document).

These procedures must be completed in order to

ensure correct operation of the hood and to allow

its use.

The checking procedure consists of 2 main steps:

1. Only for Level 4 Hood, check that the hood

symbol is present on the oven interface (Touch

Screen Panel); or

2. test hood operation by switching the oven on

and start a test program. Simulate oven door

opening and closing: the fan should change

speed.