Andrew ValuLine Einbauanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Einbauanleitung für Racks & Ständer Andrew ValuLine herunter. Andrew ValuLine 2 Seiten. Antenna mount, 0.2m 20cm, 0.3m 1ft & 0.6m 2ft

Seite drucken
Installation Instructions
0.2m(20cm), 0.3m(1ft) & 0.6m(6ft)
ValuLine Antenna Mount
Slacken bolts 1/2 turn to adjust
Azimuth (top & bottom)
slacken bolts 1/2 turn
to adjust Elevation
Antenna
offset Left
Table 1 Antenna Parts list
Item
Description
1
1ft or 2ft Reflector Assembly
2
Pre-Assembled Mount Kit
3
M10x35 c'sk skt hd screw, SS
4
M10 Nut
5
M10 Lockwasher
6
M10 Flatwasher
7
Protective Cap
8
Loctite, tube 1/2ml
9
Allen key fo M10 c'sk screws
10
Conductive grease, tube
* Part of Pre-assembled
mount Kit (item 2)
Andrew Wireless Solutions
Customer Service 24 hours
U.S.A., Canada, Mexico: 1-800-255-1479
or 1-888-235-5732
U.K.: 0800 250055
Other Europe: +44 592 782 612
Notice: Andrew disclaims any liability or responsibility for the results of improper or unsafe installation, inspection, maintenance, or removal practices.
Aviso: Andrews no acepta ninguna obligacion ni responsabilidad como resultado de practicas incorrectas o peligrosas de instalacion, inspecci6n, mantenimiento o retire.
Avis : Andrew decline toute responsabilite pour les consequences de procedures d'installation, d'inspection, d'entretien ou de retrait incorrectes ou dangereuses.
Hinweis: Andrew lehnt jede Haftung Oder Verantwortung fur Schaden ab, die aufgrund unsachgemaBer Installation, Uberprufung, Wartung Oder Demontage auftreten.
Atencao: A Andrew abdica do direito de toda responsabilidade pelos resultados de praticas inadequadas e sem seguranca de instalacao, inspecao, manutengao ou remocao.
Awertenza: Andrew declina eventual! responsabilita denvanti dell'esecuzione di procedure di installazione, ispezione, manutenzione e smontaggio improprie o poco sicure.
Rotate to adjust
Rotate to adjust Azimuth
Table 2. Fastener Torque Specifications
Qty
1
Fastener
1
Size
3*
Stainless
Steel
4*
Galvanised
4*
Steel
4*
4*
!
1*
Warning: use protective wear to avoid skin contact with the
pre-applied conductive grease on threads. Keep away from mouth.
1*
Wash throughly after use with liberal amounts of liquid soap and
1*
rinse with water. Do not store open near food sources.
Dispose of empty or partially filled containers according to
governmental regualtions for petroleum products
contents: oil, clay and zinc dust.
www.andrew.com
Visit our Web site at www.andrew.com or contact your local Andrew Wireless Solutions representative for more information.
© 2008 CommScope, Inc. All rights reserved.
Andrew Wireless Solutions is a trademark of CommScope. All trademarks identified by
marks, respectively, of CommScope. This document is for planning purposes only and is not intended to modify or supplement any
specifications or warranties relating to Andrew Wireless Solutions products or services.
Bulletin
Andrew Institute offers installation training.
elevation
DO NOT REMOVE
(item 7- Protective Caps)
Torque Values in Nm (lb.ft) for
each fastener
M5
M6
M8 M10 M12
4.5
7.7
18.7
(3.3)
(5.7)
(13.8)
2.7
4.5
11.1
(2)
(3.3)
(8.1)
A CommScope Company
102222
page
2 of 2
03
Version
Status
RE
Rev
G
Model Version
01
Status
RE
Rev
B
Antenna
offset Right
16
39.2
65.1
161
(28.9)
(48)
(118.7)
22
38
95
(16.2)
(28)
(70.1)
® or ™ are registered trademarks or trade-