Electrolux E36W100PS Installationsanleitung Handbuch - Seite 17
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Lüftungshaube Electrolux E36W100PS herunter. Electrolux E36W100PS 24 Seiten.
Seite drucken
installation
INSTALLINGTHE ELECTRICAL
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
1 Run 120 VAC electrical
power cable to the hoods wiring box.
2 Remove
the cover from the wiring box and remove one knockout.
3 Feed 6" of cable through
the knockout
opening
and secure the cable
to the wiring box with an appropriate
connector.
4 Make electrical
connections
at the hood. Connect white-to-white,
black-
to-black,
and green-to-ground.
5 Replace
the wiring
box cover and screws.
Make sure wires
are not
pinched
between
the cover and box.
POWER CONNECTION
AT HOOD
CONNECT:
WHITE-TO-WHITE
BLACK-TO-BLACK
GREEN-TO-GROUND
120 VOLT 60
HZ LINE-IN
Figure 12
CONNECTINGTHE DUCTWORK
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
1 Install an adequate
length
of 8" diameter
steel ducting
to the range
hood's duct connector.
2 Connect
the duct work between
the range hood and duct leading
to
the outside
location.
3 Duct tape all joints to make them secure and air tight.
[]
[]
[]
¸i!,,,!
8" ROUND
DUCT
_
LI i
Figure 13