Andrew Harris Woodwork Chest of Drawers Plans Montageanleitung Handbuch - Seite 13
Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Inneneinrichtung Andrew Harris Woodwork Chest of Drawers Plans herunter. Andrew Harris Woodwork Chest of Drawers Plans 15 Seiten.
Seite druckenStep 10 – Fit the drawer fronts
The small drawer fronts are the 1 by 10 pieces measuring 21 ½ inches long (1/4 inch narrower than the
space they are fitting). Measure and cut to fit your project though.
The large drawer fronts are the 1 by 10 pieces measuring 44 ¾ inches long (1/4 inch narrower than the
space they are fitting). Measure and cut to fit your project though.
Fit the drawer fronts ensuring equal gap at top and outer edge for both.
Drill two holes through the inner drawer front and then fix the outer drawer front by screwing through
the inner drawer front into the outer drawer front using 1 ¼ inch screws.
Tip clamp the drawer front in position when happy with the spacing and then screw it in place.
Step 11 – Make the top
Make the top from the three 1 by 6 pieces measuring 50 inches long and the 1 by 4 measuring 50 inches
long.
www.andrewharriswoodwork.com
Page 13 of 15