Andrew James Deluxe Blender Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Blender Andrew James Deluxe Blender herunter. Andrew James Deluxe Blender 13 Seiten.

Seite drucken

Useful tips

For the best results when blending solid ingredients, place small portions in
the glass jug a little at a time.
If you are blending solid ingredients, cut them first into small portions (2-
3cm).
When blending solid ingredients, start by adding a small quantity of liquid.
Gradually add more liquid through the lid opening.
Always hold the blender top with your hand while the appliance is operating.
Hold the grinder cup's top during operation to ensure it is steady.
Proceed carefully when blending thick liquids.
To blend solid ingredients or very thick liquids we recommend you use the
"Pulse" setting to prevent the blades from sticking.
To crush ice easily, it is advisable to add a small quantity of water.
Caution
If the glass jug is overfilled the blades may not spin freely, preventing the blending
cycles from operating correctly. If this happens, switch off the unit and unplug it
from the socket. Empty some of the contents and then switch it on again.

Cleaning and storage

Warning: Switch off the unit before cleaning to prevent electric shocks and other
hazards.
1.
In addition to this, you should read the "Safety precautions" section at the
beginning of these instructions.
2.
Do not clean the motor base, the power cord or the plug with water.
3.
Clean the motor base with a soft, damp cloth and wash it with a mild
detergent.
4.
Half-fill the jug with hot water and a small amount of mild detergent. Leave
the unit to operate at maximum speed until the jug is clean (maximum 1
minute).
5.
The jug base can be separated from the jug itself. Unscrew in a counter-
clockwise direction and remove the blade assembly together with the rubber
seal.
6.
Clean the grinder by half-filling the jug with hot water and a little washing up
liquid; fix the grinder on to the top of the motor base. Leave the unit to
operate at maximum speed until clean. Then use the water to clean all
grinder components. (maximum 1 minute).
7.
Dry all components well before using again.
8.
Caution: The blades are very sharp. Handle with care when cleaning.
9.
Never use abrasive detergents.
8