Atlantic Boilers ME STANDARD 180 Betriebs- und Wartungshandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Betriebs- und Wartungshandbuch für Boiler Atlantic Boilers ME STANDARD 180 herunter. Atlantic Boilers ME STANDARD 180 20 Seiten. Electric boiler

Seite drucken

Atlantic Boilers ME STANDARD 180 Betriebs- und Wartungshandbuch

4.0 DELIVERY/OFF-LOADING

It is recommended that the STANDARD electric boiler is

transported and, if necessary, stored on the pallet on which

it is delivered from the factory.

If temporarily stored, the surroundings should be

maintained at temperatures below 80°C, and without

condensation at relative humidities between 30% and 80%

Manhandling the STANDARD electric boiler into position

requires :-

(a) Qualified, skilled manpower

(b) Use of a pallet trolley or a fork lift truck

of lifting beams

5.0 MAINTENANCE

Effective maintenance must aim at preventing :-

a). a reduction in the movement of water circulation through the boiler - this can result in the

formation of sediment or limescale on the boiler immersion heater elements

b). pockets of high temperature water across the boiler immersion heater

elements – resulting in their destruction by overheating

c). accumulation of sediment or limescale within the boiler, particularly on

or around the boiler immersion heater elements – overcoming these developments by the

introduction of fresh, clean water without any inhibitor or de-scaling agent

Minimum maintenance periods

A) Monthly maintenance

i) Check operation of the automatic air vent

ii) Check operation of the water flow switch

iii) Check operation of the safety valve

B) Annual maintenance

i) Carry out the monthly checks

ii) Check all the electric control functions

iii) Check all pipework joints are water-tight

iv) Drain off small amount of boiler water content and check for condition

C). 4-yearly maintenance

i) Carry out the annual maintenance

ii) Isolate the boiler safely from all services

iii) Drain the boiler of water and open up for inspection

iv) Check for all maintenance requirements and remedy as necessary

v) Close and seal the boiler, fill with fresh clear water through drain outlet

vi) Pressure test, then repeat annual maintenance procedure

4) DELIVERY and OFF-LOADING

It is recommended that the STANDARD electric boiler is transported and, if necessary,

stored on the pallet on which it is delivered from the factory.

If temporarily stored, the surroundings should be maintained at temperatures below

80degC, and without condensation at relative humidities between 30% and 80%

Manhandling the STANDARD electric boiler into position requires :-

(a)

Qualified, skilled manpower

(b)

Use of a pallet trolley or a fork lift truck

(c)

Use of the lifting eyes provided on the boiler and tested of lifting beams

ME Standard Manual