DREXAN CMH-LE-1R Einbauanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Einbauanleitung für Heizgerät DREXAN CMH-LE-1R herunter. DREXAN CMH-LE-1R 2 Seiten. Self-regulating heater product

Seite drucken

KIT CONTENTS



Enclosure with Pilot Light and Hub



Bracket with sealing ring



Warning Label

REQUIRED BUT NOT PROVIDED

Materials



CMH-TERM

Equipment



Fine-tooth Hacksaw



Pipe Wrench



Electrical Tape

ASSEMBLY INSTRUCTION DETAILS

1. Insert the terminated PipeGuard CMH cable through pipe mount bracket, place the sealing ring washer provided

in the CMH-TERM termination kit) onto the threaded portion of the strain relief and insert into the lighted

Junction Box by way of the Hub.

2. Connect the wires to the base block of the LED terminals.

3. Push conductors into the FG Housing taking care not to kink wires or expose conductors.

4. Install lid on Housing making sure not to pinch conductors.

5. Attach to pipe using pipe straps through the pipe bracket ensuring pipe straps are underneath cable, not over top.

6. Find suitable location and affix Electrical Warning Label.

CMH Lighted End Seal

CMH-LE-1R/2R



Multi-head Screwdriver



CMH Stripping Tool

Installation Instructions



(2) Pipe Straps



Installation Instructions

Page 2 of 2

HD131229-1 Rev1