Atlantic Technology 223 C Gebrauchsanweisung - Seite 3
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Redner Atlantic Technology 223 C herunter. Atlantic Technology 223 C 8 Seiten. High performance loudspeaker system
Seite drucken
Models 221 LR, 223 C, and 224 SR
Figure 1:
Speaker Wiring
+
Terminals
on the speaker. Look carefully at the wires you are using and note that one of the wires
in each pair is marked by either a different color, printing, ridges, or a thread inter-
twined with the wire strands. Conventionally, the marked wire is connected to the
red (+) terminal.
Figure 2:
Typical wiring
diagram for
speakers in a
home theater.
Amplifier or Receiver
Whether your are connecting a complete System 220, or adding one speaker compo-
nent to your present system, the wiring should look like the diagram in Figure 2. Before
turning on the amplifier, be certain that no stray wire strands are touching across the
two terminals as this might damage your amplifier.
Finally, check the polarity of your front speakers by listening to some music. If the
sound seems hollow, spread out and has weak bass, recheck your connections for proper
polarity and reverse the connections if necessary.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
All manuals and user guides at all-guides.com
–
Left Front Speaker
Center Front Speaker
+ –
+ –
+ –
Dolby Pro Logic
Left
Center
Front
Front
+ –
Left Surround Speaker
You can connect your System 220 speakers by using
spade lugs or "banana" connectors, or by removing 1/2"
of insulation from each wire end, twisting the strands
of wire together, placing the wire through one of the
post holes and screwing down the nut tightly.
It is important to observe polarity while making speaker
connections: red (+) terminals on the amplifier to red
(+) on the speaker, black (-) on the amplifier to black (-)
Right Front Speaker
+ –
Left
Right
+ –
Rear
Rear
Right
+ –
+ –
Front
Right Surround Speaker
3
A
+ –
+ –
tlantic
TECHNOLOGY