Atlantic Technology FS-7.1 Gebrauchsanweisung - Seite 8
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Lautsprechersystem Atlantic Technology FS-7.1 herunter. Atlantic Technology FS-7.1 12 Seiten. 7-channel soundbar
Seite drucken
8
System Setup
System Setup
System Setup When Using a Subwoofer
Some older surround sound decoders and receivers offer a choice of "Nor-
mal" or "Wide-band" modes for the center channel speaker. The FS-7.1
speaker is designed to be used in the Normal mode.
Modern digital processing multi-channel systems provide a Bass Man-
agement menu, which typically requires you to select between "Small" or
"Large" speakers during system set-up. When using this speaker with a
dedicated subwoofer, please set all the speakers on the receiver's set-up
menu to Small.
Many of the newer surround receivers and processors give you a choice of
subwoofer-to-satellite crossover frequency. If yours does, we recommend
that you start with a setting of around 80Hz for the LCR and 120Hz for the
surrounds for the smoothest blend between the subwoofer and the FS-7.1.
System Setup Without a Subwoofer
For some listeners, a full home theater setup with a separate subwoofer
may not be feasible or desired. In that case, the FS-7.1 will provide high
quality sound all by itself—far better than the small speakers built into
most televisions. In those situations, we recommend you set your surround
sound receiver's set-up menu to "Subwoofer—Yes. "
Then set the speaker's size to "small. " Set the front crossover to 60Hz. Set
the surround crossover to 100Hz. That way, all the bass from 60Hz and
above will be sent to the FS-7.1, which will result in a full-bodied, credibly
full-range sound to be reproduced by the FS-7.1, while at the same time,
preventing the very low bass signals (below 60Hz) from overdriving the
receiver's amplifier section at high output levels.
FS-7.1 7-Channel Soundbar