Bosch KUL22 Series Informationen zur Verwendung - Seite 16
Blättern Sie online oder laden Sie pdf Informationen zur Verwendung für Kühlschrank Bosch KUL22 Series herunter. Bosch KUL22 Series 32 Seiten.
Seite druckenen Alarm
In order to utilise the freezing capa-
city, use the Super function.
→ "Freezing capacity", Page 19
Note: When the Super function is
switched on, increased noise may
occur.
Switching on Super function
Press
repeatedly until "super"
▶
lights up.
Note: After approx. 24 hours, the ap-
pliance switches to normal operation.
Switching off Super function
Press
repeatedly until the tem-
▶
perature display shows the re-
quired temperature.
8.2 Sabbath mode
To ensure that you can also use the
appliance on the Sabbath, the Sab-
bath mode switches off all non-es-
sential functions.
During Sabbath mode, the following
functions are switched off:
¡ Alarm
¡ Interior lighting
¡ Audible signals
¡ Messages on the control panel
Note: The brightness of the control
panel lighting is reduced during the
Sabbath mode.
Switching on Sabbath mode
Press and hold
▶
until an audible signal sounds.
lights up.
a
Note: After approx. 80 hours, the ap-
pliance switches to normal operation.
Switching off Sabbath mode
Press and hold
▶
until an audible signal sounds.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
16
for 15 seconds
for 15 seconds
Alarm
9 Alarm
Alarm
9.1 Door alarm
If the appliance door is open for a
while, the door alarm switches on.
A warning tone sounds and
up.
After 10 minutes, the interior lighting
flashes.
Switching off the door alarm
Close the appliance door or press
▶
.
a The warning tone is switched off.
Home Connect
10 Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
and to the Home Connect app.
After switching on the appliance, wait
at least 2 minutes until internal
device initialisation is complete. Only
then should you set up Home Con-
nect.
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
lights
1
)