Bosch Series 4 Gebrauchsanweisung - Seite 16

Seite drucken

Childproof lock

Checking time-setting options

If time-setting options have been set, the corresponding

symbols are lit up on the display. The symbol for which

the time is currently being displayed will be indicated.

To check the values for the different time-setting

options, touch the

button repeatedly until the

required symbol is indicated.

Setting the time

Once the appliance has been connected to the mains

or following a power failure, the clock will flash on the

display. Set the time.

The function selector must be set to the "Off" position.

Use the

button to set the time.

The time will stop flashing.

Confirm by pressing the

The appliance will apply the time you have set.

You can go to the basic settings to specify

Note:

whether or not the time should be shown on the display.

~ "Basic settings" on page 17

Changing the time

You can change the time again when you need to, e.g.

from summer to winter time.

To do this, when the appliance is switched off, touch the

button until the symbol for the time is underlined,

and use the

button to change the time.

button.

AChildproof lock

Y our appliance is equipped with a childproof lock so

C h i l d p r o o f l o c k

that children cannot switch it on accidentally or change

any settings.

Notes

You can go to the basic settings to specify whether

■

you want the option to set the childproof lock.

~ "Basic settings" on page 17

If a hob is connected, it will not be affected by the

■

childproof lock on the oven.

After a power cut, the childproof lock will no longer

■

be active.

Activating and deactivating

To activate the childproof lock, the function selector

must be set to the "Off" position.

Press and hold the

The symbol for this function will appear on the display.

The childproof lock is now activated.

If a timer duration

Note:

continue to count down. While the childproof lock is

active, the timer duration cannot be changed.

To deactivate the childproof lock, press and hold the

button again for approx. 4 seconds until the symbol

goes out on the display.

button for approx. 4 seconds.

has been set, this will