Electrolux U24211 EFT 530 Betriebs- und Installationsanleitung - Seite 12

Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Lüftungshaube Electrolux U24211 EFT 530 herunter. Electrolux U24211 EFT 530 15 Seiten. Electrolux range hood operation and installation manual

Seite drucken

Installation

Mounting accessories included

4 screws 5 x 45 mm

4 wall plugs (brick fixing) Ø 8 mm

4 screws 4,2 x 35 mm

1 flange Ø 125 mm

1 allen spanner (for TORX screws)

1 screw 2.9 x 13

Wall unit mounting

• Make the holes on the bottom of the cupboard

(2), using the drilling template (1).

Make a hole for the exhaust pipe (4) if the hood

is to be used in the extraction version (3).

• From inside the cupboard, insert the 4 supplied

screws (5) and tighten them in the appropriate

holes on the appliance.

Wall mounting

• Mark a centre line on the wall (1).

Fit the template onto the wall (2).

• Fix the drilling template to the wall.

• Make 3 Ø 8mm holes in the wall (3), 2 at upper

points, 1 as desired at lower points.

• Insert the three Ø 8mm expansion plugs into the

wall (4) (brick fixing only)..

• Insert 2 5x45 screws (5) but do not tighten them

completely, hang the hood (6).

• Adjust the unit so that it is positioned at a right

angle to the wall by turning the two screws on

lower side (7).

• Tighten the 2 upper screws (8).

• From inside the hood, insert the third 5x45

screw into the lower hole (9) and tighten (10).

Fig. 8 - Wall unit mounting

Fig. 9 - Wall mounting